Chair Side Equipment (Light
Cure Units)
JETLITE 5000
LED Curing Light
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||||
|
|
|
|
||||||||||||||||||||||
|
|
|
|
||||||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||||
|
|
|
|
||||||||||||||||||||||
|
Chair Side Equipment (Light
Cure Units)
JETLITE 5000 LED Curing Light
|
|
|||||||||||||||||||||||
Description:
The high-intensity Jetlite 5000 cures up to 5mm of restorative materials in just 5-10 seconds. A reliable heat management system ensures constant performance for three modes: fast, standard and ramp to cover all indications. Each mode has selectable light output durations. The selected mode and time are saved in the microprocessor memory and are recalled when the handpiece is turned on again.
Jetlite 5000 offers the convenience of a cordless unit utilizing a rechargeable battery pack. It delivers over 60 minutes of operation on a single charge. It may also be used with the power supply cord if needed. An LCD digital display provides system performance at a glance. The selected mode, battery status and selected or remaining time in seconds can be seen on the unit display. Jetlite 5000 also features an audible low battery warning - it beeps once so you know when to re-charge. An automatic standby mode conserves power after 5 minutes of non-use.
Features
High light intensity, cures up to 5mm of restorative materials in just 5-10 seconds (spectrum of 450 to 490 nm, and a peak at 470 nm)
Three modes: fast, standard and ramp to cover all indications
Lightweight handpiece (less than 11oz) reduces fatigue
300 to 400 10-second cycles with a single charge
Convenient, cordless handpiece
Autoclavable light guide tip (11-7.5mm tapered)
Built-in light intensity meter
Li-lon battery technology with self care rapid charge circuit
Composite curing depth tester to check the curing ability of the unit and material together at once
Eye protection shield and no-glare cones included with unit
Indications:
LED curing light for the initiation of polymerization of light-activated resinous dental pit and fissure sealants and dental restorative materials.
Packaging:Each Jetlite 5000 includes: power adapter, handpiece, charger base, 11-7.5 mm tapered light guide, eye protection shield, no-glare cones (2), curing depth meter, reset plug and accessories box.
Product Numbers
Optional Parts
24-800120 Jetlite 5000 Kit Replacement Parts
24-995135 Remote handpiece holder 24-950532 3 mm light guide 24-950531 8 mm light guide 24-950530 11 mm light guide 24-950533 13 mm light guide
24-9950551 LED module – nose cone 24-9950552 Handpiece (without battery pack) 24-950777 Li-ion battery pack 24-995125 Charger base 24-800300 Power adapter 24-950535 11 mm to 7.5 mm tapered light guide 24-950490 Eye protection shield 24-950511 No-glare cones (5) 24-950775 Reset plug